Langkah-demi-Langkah Dual Nstreme

• Masing –masing titik menggunakan 2 buah antena dan 2 buah wireless card
• Satu link untuk transmit dan satu link lainnya untuk receive
• Merupakan Mikrotik propetiary setting
• Meningkatkan throughput
• Wireless delay hampir tidak ada

Berikut adalah langkah-demi-langkah penjelasan bagaimana mengaktifkan nstreme ganda di perangkat MikroTik:

I. MikroTik Device 1
1.1. Enabling wireless cards 1 dan 2:

[admin@MikroTik] > interface enable wlan1 [admin@MikroTik] > interface enable wlan2

1.2. Menetapkan IP address ke ethernet interface:

[admin@MikroTik] > ip address add address=192.168.1.1/24 interface=ether1

1.3. Membuat bridge interface:

[admin@MikroTik] > interface bridge add

1.4. Menambahkan ethernet interface ke bridge interface:

[admin@MikroTik] > interface bridge port add interface=ether1 bridge=bridge1

1.5. Setting wireless cards 1 dan 2 untuk nstreme mode:

[admin@MikroTik] > interface wireless set wlan1 mode=nstreme-dual-slave [admin@MikroTik] > interface wireless set wlan2 mode=nstreme-dual-slave

1.6. Membuat nstreme dual interface dan setting Tx dan Rx radios dan frequencies:

[admin@MikroTik] > interface wireless nstreme­-dual add rx­-radio=wlan1 tx­-radio=wlan2 rx-­band=5ghz tx-­band=5ghz rx-­frequency=5180 tx­-frequency=5300

1.7. Adding nstreme interface ke bridge:

[admin@MikroTik] > interface bridge port add interface=nstreme1 bridge=bridge1

1.8. Checking MAC address pada nstreme interface (pada contoh ini: 11:11:11:11:11:11):

[admin@MikroTik] > interface wireless nstreme­dual print Flags: X ­ disabled, R ­ running 0 X name="nstreme1" mtu=1500 mac­address=11:11:11:11:11:11 arp=enabled disable­running­check=no tx­-radio=wlan2 rx­-radio=wlan1 remote­mac=00:00:00:00:00:00 tx-­band=5ghz tx­-frequency=5300 rx­-band=5ghz rx­-frequency=5180 rates­b=1Mbps,2Mbps,5.5Mbps,11Mbps rates­a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps framer­policy=none framer­limit=2560

II. MikroTik Device 2

2.1. Enabling wireless cards 1 dan 2:

[admin@MikroTik] > interface enable wlan1 [admin@MikroTik] > interface enable wlan2

2.2. Menetapkan IP address ke ethernet interface:

[admin@MikroTik] > ip address add address=192.168.1.2/24 interface=ether1

2.3. Membuat bridge interface:

[admin@MikroTik] > interface bridge add

2.4. Menambahkan ethernet interface ke bridge interface:

[admin@MikroTik] > interface bridge port add interface=ether1 bridge=bridge1

2.5. Setting wireless cards 1 dan 2 untuk nstreme mode:

[admin@MikroTik] > interface wireless set wlan1 mode=nstreme-dual-slave [admin@MikroTik] > interface wireless set wlan2 mode=nstreme-dual-slave

2.6. Membuat Nstreme dual interface dan setting Tx dan Rx radios dan frequencies dan setting MAC address pada remote nstreme interface (pada contoh ini: 11:11:11:11:11:11 [step 1.8]):

[admin@MikroTik] > interface wireless nstreme­-dual add rx­-radio=wlan1 tx­-radio=wlan2 rx­-band=5ghz tx-­band=5ghz rx-­frequency=5300 tx­-frequency=5180 remote­mac=11:11:11:11:11:11 disabled=no

2.7. Menambahkan nstreme interface ke bridge:

[admin@MikroTik] > interface bridge port add interface=nstreme1 bridge=bridge1 [admin @ MikroTik]> interface bridge port add interface = nstreme1 jembatan = bridge1

2.8. Memeriksa MAC address nstreme interface (pada contoh ini: 22:22:22:22:22:22):

[admin@MikroTik] > interface wireless nstreme­dual print Flags: X ­ disabled, R ­ running 0 R name="nstreme1" mtu=1500 mac­address=22:22:22:22:22:22 arp=enabled disable­running­check=no tx­-radio=wlan2 rx­-radio=wlan1 remote­mac=11:11:11:11:11:11 tx­-band=5ghz tx-­frequency=5180 rx-­band=5ghz rx-­frequency=5300 rates­b=1Mbps,2Mbps,5.5Mbps,11Mbps rates­a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps framer­policy=none framer­limit=2560

III. MikroTik Device 1

1.9. Setting MAC address remote nstreme interface (pada contoh ini: 22:22:22:22:22:22 [step 2.8]):

[admin@MikroTik] > interface wireless nstreme­-dual set nstreme1 remote­mac=22:22:22:22:22:22 disabled=no